Roof leak detection
Finding where the water actually gets in
Ice and water shield is a self-adhering rubberised membrane applied at the roof's most vulnerable points — eaves, valleys, and around penetrations — where ordinary underlayment is not enough. It seals around fixings rather than just lying under them, so water that gets past the covering still cannot reach the decking. It matters most where meltwater backs up behind ice at a cold eave, and in valleys where water volume is highest.
Duluth sits in the metro Atlanta hail and wind corridor. Spring storm season here does two kinds of damage, and only one of them is obvious. Straight-line wind lifts shingle tabs, breaks the seal strip underneath, and drops them back down looking untouched — the roof then leaks in the next storm from a spot that shows nothing from the ground. Hail does the other kind, bruising the mat under the granules so the shingle fails months later. Housing stock across Gwinnett County skews newer and denser than most of the state, which means a lot of architectural asphalt in the 10-to-20-year band where the seal strip is past its best but the roof is nowhere near replacement.
Duluth has a population of about 31,873, and the housing stock here sets the pattern for what fails first on a roof.
At the eaves it matters most in the north of the state, where freeze-thaw and ice damming are real. In valleys and around penetrations it is worth having anywhere, because that is about water volume rather than ice.
Only where the covering comes off, since it bonds directly to the decking. It is a re-cover or major-repair item rather than a retrofit.
Finding where the water actually gets in
The metal that seals every joint
Bruising and granule loss
Lifted tabs and broken seals
What repairs actually cost here
Replacing a failed roof window
You will get a straight answer on whether Duluth needs someone out today or whether it can wait — before anyone quotes you for anything.
Call (229) 592-0097